Model Number

FHT-C16E

Summarize:

FHT-C16 Optical multiplexer is a low cost and high performance optical line transmission equipment, which combines four ITU-T G.703 compliant standard electrical E1, 2.048Mbps signals into an optical data stream for transport over fiber optic cables. Several transmitter options for different cable types and wave-lengths are available. This optical line equipment is developed for transmission in access networks, corporate networks, dedicated networks for railway and power companies etc.

Main Features:

Ø         Advanced and compact design that performs E1 multiplexing & de-multiplexing and provides a 100Mbit/s optical interface in a single unit.

Ø         Built-in AC/DC or DC/DC converter and supervisory microprocessor

Ø         Digital clock data recovery for E1 signal

Ø         Provides visible and audible alarm indication

Ø         Low power consumption

Ø         Order wire channel for end to end installation and maintenance

Ø         Auxiliary data channel in optical line code

Ø         Centralized network management with the Top one NMS

Ø         High reliability

Ø         Flexible installation in various mechanical constructions.

Ø         Local and remote loop back test for diagnostics

Technical parameter:

◆ Electrical (E1 interface)
　　Channel capacity: 16 channels
　　Bit rate: 2.048Mbps±50ppm
　　Line code: HDB3
　　Nominal impedance: 75Ω unbalanced / 120Ω balanced
　　Jitter character: ITU-T G.742,G.823 compliant
◆ Optical
　　Bit rate: 100 Mbit/s
　　Line code: 4B5B
　　Optical source: LD
　　Transmitter power: ≥－9dBm
　　Receiver Type: PINFET
　　Receiver sensitivity: ≤－38dBm（BER≤10^-11）
　　Wavelength: 1310nm / 1550nm
　　Optical connector: FC/SC
◆ Power supply
　　Power input: AC/DC optional
　　Power consumption: ≤10W

◆ Environment
　　Temperature: －5℃～＋40℃ for operation
　　　　　　　　　　－20℃～＋60℃ for storage & transport
　　Humidity: 10%～90% RH non-condensing
◆ Physical
   Standalone (19")
　　Dimension: 440mm(width)×43.5mm(height)×150mm(depth)
　　Weight: 1.2 kg
　　Rack Type: EIA 19"
   Rack Mount（19"）
　　Dimension: 483mm(width)×266mm(height)×225mm(depth)
　　Weight: 12 kg（full deploy）
　　Rack Type: EIA 19"

Product series:

Mode Introduction